Operation Manual

Set Up the Encryption Key

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

Note: The DST router and DST adapters on your network must use the

same encryption key. If the DST adapters on your network use a

different encryption key than the DST router, they will no longer be

connected to your network.

7. Click the Apply button.

Your settings are saved.

Create a New Encryption Key for the DST Router

 To create a new encryption key for the DST router:

1. Launch a web browser from a computer or WiFi device that is connected to the network.

2. Enter http://www

.routerlogin.net.

A login window displays.

3. Enter the DST router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home page displays.

4. Select ADV

ANCED > Advanced Setup > DST Settings.

5. Select the Create new encryption key radio button.

6. Enter a new encryption key in the field.

The encryption key must be a value of 8 to 63 ACSCII characters.

7. Make sure that the Apply same key check box next to each DST adapter that your own is

selected.