Operation Manual

Connect to the DST Router Network and Access the DST Router

Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST

- If the DST router’s installation assistant detects that the DST router is connected

to another router or gateway, the following page displays and prompts you to set

up the DST router in router mode or access point mode:

• If you already set up the Internet connection, enter http://www.routerlogin.net in the

address field of your web browser to view or manually change your DST network

setting.

For more information, see Log In to the DST Router on page 31.

4. If a modem is detected, select how you want to set up your Internet and click the Next

button.

5. If an existing router or gateway is detected, select the Help Me Choose radio button or Let

Me Choose radio button:

• Help Me Choose. If you select the Help Me Choose radio button, NETGEAR genie

asks you a few questions to determine if you should set the DST router in router mode

or access point mode. W

e recommend that you select the Help Me Choose radio

button.

• Let Me Choose. If you select the Let Me Choose radio, you must select the Router

Mode radio button or the Access Point Mode radio button.

You can change the

mode by running the Setup Wizard again. For more information, see Use the Internet

Setup Wizard on page 45.

For more information about how to set up your DST router with an existing router or

gateway

, see Set Up the DST Router With an Existing Router or Gateway on

page 154.

6. Follow the onscreen instructions.

The DST router connects to the Internet.

7. After the DST router detects your Internet connection, you are prompted to download the

free genie app and free ReadySHARE V

ault app.

8. Select the check box next to the apps that you want to download and click the Next button.

The DST router’s installation assistant checks the DST router’s firmware version.

9. If the DST router’

s firmware needs to be updated, follow the onscreen instructions to update

the firmware.