Operation Manual

DST Router Supplemental Information
261
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
Factory Settings
You can return the DST router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the DST router for at least seven
seconds. The DST router resets, and returns to the factory configuration settings shown in
the following table.
Table 5. Factory default settings
Feature Default Setting
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed AutoSensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone Pacific Time
GMT-8 for NA
DHCP starting IP address 192.168.1.2
DHCP ending IP address 192.168.1.254
DMZ Disabled
Time adjusted for daylight savings
time
Disabled
SNMP Disabled
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering Disabled