Operation Manual

Manage Port Forwarding and Port Triggering
241
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
Enable Port Triggering
 To enable port triggering:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port T
riggering radio button.
6. Clear the Disable Port Triggering check box.
If this check box is selected, the DST router does not use port triggering even if you have
specified port triggering settings.
7. In the Port T
riggering Timeout field, enter a value up to 9999 minutes.
This value controls how long the inbound ports stay open when the DST router detects no
activity
. This value is required because the DST router cannot detect when the application
terminates.
Change a Port Triggering Rule
You can change an existing port triggering rule.
 To change a port triggering rule:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.