Operation Manual

Manage Port Forwarding and Port Triggering
236
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
7. Click the Add Custom Service button.
8. In the Service Name field, enter a descriptive name.
9. In the Service T
ype menu, select the protocol (TCP or UDP) that is associated with the
service or application.
If you are unsure, select TCP/UDP.
10. In the External Starting Port field, enter the beginning port number
.
If the service or application uses a single port, enter the same port number in the Ending
Port field.
If the service or application uses a range of ports, enter the ending port number of the
range in the External Ending Port field.
11. Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• T
ype the port numbers in the Internal Starting Port and Internal Ending Port fields.
12. T
ype the IP address in the Internal IP address field or select the radio button for an
attached device listed in the table.
13. Click the Apply button.
Your settings are saved. The rule is added to the table on the Port Forwarding / Port
T
riggering page.
Change a Port Forwarding Rule
You can change an existing port forwarding rule.
 To change a port forwarding rule:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.