Operation Manual

Manage Your DST Router Network
198
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
 To erase the configuration settings:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Administration > Backup Settings.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is
password, and the LAN IP address is 192.168.1.1. DHCP is enabled.
Remote Management
The remote management feature lets you access your DST router over the Internet to view or
change its settings. You must know the DST router’s WAN IP address to use this feature. For
information about remote access using Dynamic DNS, see Chapter 9, Manage Dynamic
DNS and Access Storage Devices Through the Internet.
Note: Be sure to change the password for the user name admin to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See Change the DST
Router admin Password on page 181.
Set Up Remote Management
 To set up remote management:
1. Launch a web browser from a computer or WiFi device that is connected to the network.