Operation Manual

Specify Network Settings for the DST Router
157
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
The BASIC Home page displays.
5. Select ADV
ANCED > Advanced Setup > Wireless AP.
6. Select the Enable AP Mode check box.
7. Scroll down and select the radio button for the IP address setting that you want to use:
• Get dynamically from existing router. The other router on the network assigns an
IP address to this DST router while this DST router is in AP mode.
• Enable fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to this DST router while it is in
AP
mode. Using this option effectively requires advanced network experience.
Note: To avoid interference with other routers or gateways in your network,
We recommend that you use different WiFi settings on each router.
You can also turn off the WiFi radio on the other router or gateway and
use the DST router only for WiFi client access.
8. Click the Apply button.
The IP address of the DST router changes, and you are disconnected.
9. T
o reconnect, close and restart your browser and enter http://wwwrouterlogin.net.