Operation Manual

Specify Network Settings for the DST Router
154
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
Your settings are saved.
Specify WPS Settings
Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi
password.
 To specify WPS settings:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Router’s PIN field displays the PIN that you use on a registrar (for example, from the
Network Explorer on a Vista Windows computer) to configure the DST router’s WiFi
settings through WPS.
5. (Optional) Select or clear the Disable Router’s PIN check box.
The PIN function might temporarily be disabled when the DST router detects suspicious
attempts to break into the DST router’s WiFi settings by using the DST router’s PIN
through WPS. You can manually enable the PIN function by clearing the Disable
Router’s PIN check box.
6. (Optional) Select or clear the Keep Existing Wireless Settings check box.
By default, the Keep Existing Wireless Settings check box is selected. We recommend
that you leave this check box selected.
If you clear this check box, the next time a new WiFi client uses WPS to connect to the
DST router, the DST router WiFi settings change to an automatically generated random
SSID and security key.
7. Click the Apply button.
Your settings are saved.
Set Up the DST Router With an Existing Router or Gateway
If you own an existing router or gateway, you can connect your new DST router to your
existing router or gateway and set up the router in one of the following modes: router mode or
access point (AP) mode.