Operation Manual

Specify Network Settings for the DST Router
150
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
4. Select Guest Network.
5. Select any of the following WiFi settings:
• Enable Guest Network. When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
• Enable SSID Broadcast. If this check box is selected, the WiFi access point
broadcasts its name (SSID) to all WiFi stations. Stations with no SSID can adopt the
correct SSID for connections to this access point.
• Allow guest to see each other and access my local network. If this check box is
selected, anyone who connects to this SSID can access your local network, not just
the Internet.
6. Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the WiFi devices in your network to use the guest network name in
addition to the main SSID.
7. Select a radio button for a security option.
The WPA2 options use the newest standard for the strongest security, but some older
computers and WiFi devices cannot use it. W
e recommend that you select the WPA-PSK
[TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi network and lets
computers and WiFi devices can connect to the WiFi network by using either WPA2 or
WPA security.
8. Click the Apply button.
Your settings are saved.