Operation Manual

Specify Network Settings for the DST Router
144
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
4. Select ADVANCED > Setup > LAN Setup.
5. In the Address Reservation section, click the Add button.
6. In the IP Address field, type the IP address to assign to the computer or server
.
Choose an IP address from the DST router’s LAN subnet, such as 192.168.1.x.
7. T
ype the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC
address from the
Attached Devices page and paste it here.
8. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the DST
router’
s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP
release and renew.
Change a Reserved IP Address
You can change a reserved IP address entry.
 To change a reserved IP address entry:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www
.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.