User Manual

9.
To prevent wireless clients from associating with the repeater and allow LAN client
associations only, select Disable Wireless Client Association.
You can leave the check box cleared if you prefer wireless clients to be able to
associate with the repeater.
10.
In the Base Station MAC Address field, enter the MAC addresses for the access
point that will be the base station.
11.
Click the Apply button.
Your settings are saved.
12.
Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the router can connect to the
Internet or share files and printers with any other computer or server connected to
the other base station.
Set Up a Bridge for a Port Group or VLAN
Tag Group
Some devices, such as an IPTV, cannot function behind the router’s network address
translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP’s network directly, you can enable the
bridge between the device and the router’s Internet port or add new VLAN tag groups
to the bridge.
Note: If your ISP provides instructions for how to set up a bridge for IPTV and Internet
service, follow those instruction.
Set Up a Bridge for a Port Group
If the devices that are connected to the router’s Ethernet LAN port or WiFi network
include an IPTV device, your ISP might require you to set up a bridge for a port group
for the router’s Internet interface.
A bridge with a port group prevents packets that are sent between the IPTV device and
the router’s Internet port from being processed through the router’s network address
translation (NAT) service.
User Manual87Manage Network Settings
Nighthawk AC1900 Smart WiFi Router Model R7000