User Manual

10.
Click the Apply button on the Router / AP / Bridge Mode page.
Your settings are saved.
Set Up the Router as a WiFi Repeater
You can set up your router as a wireless repeater. In this mode, the router communicates
with another base station or wireless station. Use a wired Ethernet connection to set up
the repeater unit to avoid conflicts with the wireless connection.
Note: You cannot use the WPA2-PSK (AES), WPA-PSK (TKIP) + WPA-PSK (AED), or
WPA/WPA2 Enterprise security modes if you want to enable this mode. You also cannot
select the Auto channel selection mode.
To set up the router in repeating mode:
1.
Make a note of the WiFi settings of the other router to which this router will connect.
You must know the SSID, WiFi security mode, wireless password, and operating
frequency (either 2.4 GHz or 5 GHz).
2.
Launch a web browser from a computer or mobile device that is connected to the
network.
3.
Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > Router/ AP / Bridge Mode.
The Router / AP / Bridge Mode page displays.
6.
Select Repeating Mode.
The page adjusts.
7.
Select the Enable Wireless Repeating Function check box.
8.
In the Repeater IP Address field, enter the IP address of the repeater router.
This IP address must be in the same subnet as the base station, but different from
the LAN IP address of the base station.
User Manual86Manage Network Settings
Nighthawk AC1900 Smart WiFi Router Model R7000