User Manual

Technical Specifications
The following table shows the technical specifications for the router.
Table 4. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
Data and routing protocols
North America: 120V, 60 Hz, input
UK, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
All regions (output): 12V/3.5A DC output
Power adapter
Dimensions: 11 x 7.17 x 1.9 in. (280 x 182 x 49 mm)Dimensions
Weight: 0.94 lb (430 g)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
FCC Part 15 Class BElectromagnetic emissions
Four RJ-45 ports supporting 10BASE-T, 100BASE-TX, and 1000BASE-TLAN
One RJ-45 port supporting 10BASE-T, 100BASE-TX, and 1000BASE-TWAN
Maximum WiFi signal rate complies with the IEEE
®
802.11 standard.
Note that NETGEAR makes no express or implied representations or
warranties about this product’s compatibility with any future WiFi
standards. 802.11ac 1300 Mbps is approximately 2x faster than 802.11n
600 Mbps. Up to 1300 Mbps WiFi speeds achieved when connecting to
other 802.11ac 1300 Mbps devices.
WiFi
Auto-rate sensingRadio data rates
IEEE 802.11 b/g/n 2.4GHz + 256 QAM support
IEEE 802.11 a/n/ac 5.0GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node
(typically 50–70 nodes)
Maximum computers per
WiFi network
User Manual185Supplemental Information
Nighthawk AC1900 Smart WiFi Router Model R7000