User Manual

Extend the Antennas
Before you install your router, extend the antennas as shown in the following figure.
Figure 4. Position the antennas
Router Label
The router label shows the login information, WiFi Network Name (SSID), network key
(password), serial number, and MAC address.
NOTE:
1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR
TOLERANCES.
2. INK COLOR IS SHOWN TO THE RIGHT.
3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT.
4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM.
5. See NTGR DOC-00112 for SN standard.
6. NTGR SN and MAC address barcode to be encoded AIM
USS Code39 and include printed characters below
barcodes.
7. INSURE COUNTRY OF ORIGIN IS CORRECT.
A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE
THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND
INCLUDE COUNTRY OF ORIGIN ON LABEL.
B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A
THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT
FROM ARTWORK (USE LAYERS).
Figure 5. Router label
User Manual15Hardware Setup
Nighthawk AC1900 Smart WiFi Router Model R7000