User Manual

Manage Your Network
163
Nighthawk AC1900 Smart WiFi Router
The Plan Selection page displays.
7. Click or tap the SELECT button under the Arlo plan that you want.
The Sync Cameras page displays.
8. Sync your Arlo camera to the router:
a. Press the WPS button on your router for 3 to 5 seconds.
The WPS LED on the router blinks.
b. Press and release the Sync button on the top of the Arlo camera.
A blue LED on the camera blinks rapidly to confirm a successful sync.
c. Click the Continue button.
Your Arlo camera displays on the page and the camera is ready for viewing.
Register Your Router With an Existing Arlo Account
Before you can register your router with your Arlo account, you must update the firmware on
your router and make sure that the Arlo feature is enabled. For more information, see
Enable
the Arlo Feature on the Router on page 161.
After you register your router with your Arlo account, you can sync your Arlo cameras to your
router. For more information, see
Sync Arlo Cameras to Your Router on page 164.
 To register your router with an existing Arlo account and sync your Arlo camera to
your router:
1. On a computer or WiFi device that is connected to the router, visit
https://arlo.netgear.com or launch the Arlo app.
2. Log in to your Arlo account.
The Cameras page displays.
3. Click or tap the Add Device button.
The Getting Started page displays.
4. Select or tap Arlo (Router).
The Setup page displays.
Your router’s serial number and your time zone are detected and display on the page.
5. To change your time zone, select your time zone from the menu.
6. Click or tap the Continue button.
The Cameras page displays.
7. Sync your Arlo camera to your router:
a. Press the WPS button on your router for 3 to 5 seconds.
The WPS LED on the router blinks.