Owner's Manual

Advanced Settings
91
Dual Band 11ac WiFi Router R6200
2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
Scroll to view
more settings
3. In the Wireless Repeating Function screen, select the Enable Wireless Repeating
Function check box.
4. Select the W
ireless Base Station radio button.
5. Enter the MAC address for one or more repeater units.
6. Click Apply to save your changes.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
Note: If you are using the R6200 base station with a non-NETGEAR router
as the repeater, you might need to change additional configuration
settings. In particular, you should disable the DHCP server function
on the wireless repeater AP.
 To configure the router as a repeater unit:
1. Log in to the router that will be the repeater
. Select Basic > Wireless Settings and
verify that the wireless settings match the base unit exactly. The wireless security option
has to be set to WEP or None.
2. Select Advanced > W
ireless Repeating Function.
3. Select the Enable W
ireless Repeating Function check box.
4. Select the W
ireless Repeater radio button.