Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server

5-8 Novell NetWare Printing

To associate a NetWare printer object with each printer port of the print server:

a. Select the print server you added in step 3.

b. Select Print Server Conﬁguration.

c. Select Printer Conﬁguration.

d. Select the entry with printer number 0 on the Conﬁgured Printers submenu to open

the Printer 0 Conﬁguration window.

e. Type the predetermined print server name in the Name entry ﬁeld, using the

convention shown in T

able 5-2.

When referring to the table, assume that PSxxxxxx is the predetermined name of the print

server. You can provide a name different from the one presently in the print server, and

then you can change the name of the device when you execute the PSCONFIG program

for the RPRINTER setup.

The factory default name for the print server is PSxxxxxx as shown on the label on the

bottom of the device.

f. Select the Type entry ﬁeld to open the Printer Types window.

g. Select Remote Parallel, LPT1 in the Printer Types window and press [Enter].

h. Press [Esc].

i. Select Yes to save the changes.

Table 5-2. RPRINTER Mode Printer Name Mapping

Print Server Port Printer Name in File Server

Printer port 1 PSxxxxxx

Printer port 2 PSxxxxxx_P2

Logical port 1 PSxxxxxx_L1

Logical port 2 PSxxxxxx_L2

Logical port 3 PSxxxxxx_L3

Logical port 4 PSxxxxxx_L4

Logical port 5 PSxxxxxx_L5

Logical port 6 PSxxxxxx_L6

Logical port 7 PSxxxxxx_L7

Logical port 8 PSxxxxxx_L8