Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Microsoft Windows NT and Windows 2000 Printing 4-27
3. Click on the Advanced button, as illustrated in Figure 4-28.
The TCP/IP menu opens, as illustrated in Figure
4-29.
Figure 4-29. TCP/IP Menu
4. Click on the TCP/IP menu tab, which is located at the top of the window, as illustrated in
Figur
e 4-29.
Refer to T
able 4-1 on page page 4-28 for a description of each field in the TCP/IP menu.
5. Select Enable or Disable to enable or disable DHCP.
If DHCP is enabled, the print server can be set up to obtain its IP address from a DHCP
(Dynamic Host Configuration Protocol) server or can be manually assigned an IP address at
this menu tab.
If DHCP is disabled, be sure that the IP address assigned to the device is not already in use
when assigning the IP address manually.
For a private TCP/IP network, you can use the IETP-designated private addresses (for
example, 192.168.X.X or 10.X.X.X). For more information about IP addresses, refer to
Appendix
B, “Understanding IP Addresses.”