Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Microsoft Windows NT and Windows 2000 Printing 4-23
12. Click on Finish.
The FirstGear Print Server Program is now installed on your PC.
You must now set up your PC to print to the print server. Proceed to “
Setting Up Your PC to
Recognize the Print Server” on page 4-8.
Setting Up Your PC to Recognize the Print Server
Refer to page 4-8 for instructions on setting up your PC to recognize the print server.
Installing and Setting Up FirstGear—Diskette Option
Use this option if your system does not have a CD-ROM drive.
To install the FirstGear software:
1. Insert a blank diskette into the Drive A, and click on OK, as illustrated in Figure 4-25.
The diskette installation will not work in any other drive but drive A, and you must also use a
high-density disk.
Figure 4-25. Install From Disk Window
2. Refer to “Installing and Setting Up FirstGear—User Installation” on page 4-2 to continue with
the installation and setup process.
For information about the advanced setup procedures for the NETGEAR print server, refer to
Chapter
7, “Using Advanced Management Tools.”