Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Microsoft Windows 95 and Windows 98 Printing 3-17
Installing and Setting Up FirstGear—Admin Installation
Choose this option if you are using Windows 95 or Windows 98 to install, print, and manage the
NETGEAR print server.
To install the NETGEAR print server software for admin installation:
1. Turn on the power to your PC.
2. Insert the NETGEAR Resource CD-ROM.
The NETGEAR window briefly opens, and the FirstGear Introductory window, as illustrated
in Figure
3-19, opens.
If it does not, click on Start > Run > and then type in “Install.exe” at the prompt (for example,
“D:Install.exe”) to start the installation process.
Figure 3-19. FirstGear Introductory Window
Note: It is necessary to install the FirstGear software on every PC in the network that
will use the printers attached to the Model PS104/PS105/PS110/PS113 print server.