Quick Reference Guide

Microsoft Windows 95 and Windows 98 Printing 3-1

Chapter 3

Microsoft Windows 95 and Windows 98 Printing

This chapter describes how to conﬁgure and use the NETGEAR Model PS104/PS105/PS110/

PS113 print server in a Microsoft Windows networking environment.

To correctly conﬁgure your hardware and software for the Microsoft Windows platform, you must:

• Install FirstGear for Print Server software.

• Run Setup.

• Conﬁgure the user PC to print to the NETGEAR print server.

FirstGear for Print Server

This section describes how to install and set up the print server with the FirstGear for Print

Server Program in Windows 95, Windows 98, or Windows 2000. There are several options to

choose from:

• User Installation—used through the NetBEUI protocol, this option is geared toward the user

who is already connected to the LAN and needs to set up a PC to the NETGEAR print server.

• Admin Installation—this option is geared toward the user who is connected to the LAN and

also manages the print server.

• User Installation with diskette—this option generates an installation ﬂoppy disk for the user

without a CD-ROM drive.