Quick Reference Guide

Installation 2-1
Chapter 2
Installation
This chapter describes the installation and setup of the NETGEAR Model PS104/PS105/PS110/
PS113 print server.
Preparing the Site
Before you begin installing the print server, prepare the installation site. Make sure the operating
environment meets the physical requirements of the print server, as described in Appendix
A,
“Technical Specifications.”
Verifying Package Contents
Your package should contain the following:
• Model PS104 Print Server, Model PS105 Print Server, Model PS110 Print Server, or Model
PS113 Print Server
• Power adapter
• BNC terminator and T-connector (Model PS105 only)
• Model PS104/PS105/PS110/PS113 Print Server Resource CD
• Model PS104/PS105/PS110/PS113 Print Server Installation Guide
• Warranty & Owner Registration Card
• Customer Support Phone Card
Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing, or
damaged parts. Refer to “Customer Support
” on page iii for the location of customer support in
your area.
Keep the carton, including the original packing materials. Use them to repack the print server if
you need to return it for repair.