Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
1-6 Introduction
Normal/Uplink Push Button on the Model PS104/PS105
Print Server
The Normal/Uplink push button on the Model PS104 Print Server and the Model PS105 Print
Server allows you to select Normal (MDI-X) or Uplink (MDI) wiring for NETWORK port 1,
eliminating the need to use a crossover cable. Ports 2 to 4 on the print server are permanently
configured for Normal wiring.
As illustrated in Figure
1-5, Figure 1-6, Figure 1-7, and Figure 1-8 all the print servers have a
power adapter receptacle that accepts a 12 V DC power adapter.
Key:
1 = PRINTER Port
2 = NETWORK port (10BASE-T connectors)
3 = Normal/Uplink push button
4 = Power adapter receptacle
Figure 1-5. Rear Panel of the Model PS104 Print Server
Key:
1 = PRINTER Port
2 = Network Port (Four 10BASE-T and One BNC Connector)
3 = Normal/Uplink push button
4 = Power adapter receptacle
Figure 1-6. Rear Panel of the Model PS105 Print Server
432
NETWORK
1
PRINTER
12VDC 0.8-1.2A
Normal/Uplink
8624EB
21 3 4
4321
BNC
9225EB
1 2 3 4
NETWORK
PRINTER
12VDC 0.8-1.2A
Normal/Uplink