Quick Reference Guide

IP Setup E-1
Appendix E
IP Setup
This appendix provides a brief overview of IP addressing.
Overview
This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or
assigned a wrong subnet IP address. Refer to T
able E-1 to assign a static IP address.
T
able E-1 describes each setting.
Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered.
Ensure that the IP address assigned to the device is not already in use.
Table E-1. IP Configuration Settings
Setting Recommended Value
Device Name Shown on a sticker on the base of the device in the form
"PSxxxxxx."
Device IP Address 192.168.0.1
Gateway IP Address 0.0.0.0
Subnet Mask 0.0.0.0.