Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
D-2 Using NetWare 5 NDPS
4. Select NDPS Manager as the object to create. The Create NDPS Manager Object
window, as illustrated in Figur
e D-1, opens.
Figure D-1. Create NDPS Manager Object Window
5. Type a name in the NDPS Manager Name.
6. Browse the Resident Server and select where you want the NDPS Manager object to be
assigned.
7. Browse the Database Volume and select where you want the NDPS Manager database to
be assigned.
8. Click on Create.
The new NDPS Manager is displayed in the main browser window.
To start the NDPS Manager in future, enter the following command at the console:
LOAD NDPSM
Then select the NDPS Manager object.
To start the NDPS Manager whenever you bring up the server, add a command like the following
to your server’s AUTOEXEC.NCF file:
LOAD NDPSM SerMGR.TeSupp
The last item is the name of the NDPS Manager object you want to load.
After creating an NDPS Manager, you can create NDPS printers by using NetWare Administrator,
which is explained in the following section.