Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server

Using Advanced Management Tools 7-23

NetWare Remote Printer (RPRINTER) Mode

In the NetWare RPRINTER mode, QUICKSET uses these settings:

• Ethernet 802.2 frame type

Set to Enable

• Ethernet 802.3 frame type

Set to Enable

• Ethernet SNAP frame type

Set to Enable

• Ethernet II frame type: Enable

• Set attached NetWare Print Server as the speciﬁed server

• Set NetWare Operation Mode: Remote Printer Mode

• Set the print server name as speciﬁed in the parameter list

The QUICKSET program conﬁgures all of the printer ports on the printer to service the same

NetWare print server. If you want to conﬁgure the printer ports to service different NetWare print

servers, refer to “

Attaching to More Than One NetWare Print Server” on page 5-21.

In the Novell RPRINTER mode, use these QUICKSET commands:

• For Binary-based ﬁle server

QUICKSET Name R (UN=P) (/Q1=W) (/Q2=X) (/FS=F)

• For NDS Network

QUICKSET Name R (/UN=P) (/Q1=W) (/Q2=X)