Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server

Using Advanced Management Tools 7-21

Conﬁguring Using QUICKSET

This section describes how to use the QUICKSET program to conﬁgure the Novell server and the

print server. Use QUICKSET /? to display the help screen. You must have the following software

and drivers loaded prior to executing the QUICKSET program:

• NetWare Link Support Layer, LSL.COM

This program looks into the NET.CFG ﬁle for parameters.

• Network adapter card driver for the adapter card installed and connected to the network

The network speed, duplex mode, and frame types are all controlled within the NET.CFG ﬁle.

• NetWare IPX/SPX protocol, IPXODI.COM

This program provides the IPX support for the adapter card.

• NetWare shell, NETX.EXE, or NetWare virtual loadable module; VLM.EXE and its

associated modules

NetWare Print Server (PSERVER) Mode

In the NetWare Print Server mode, QUICKSET uses these settings:

• Ethernet 802.2 frame type: Enable

• Ethernet 802.3 frame type: Enable

• Ethernet SNAP frame type: Enable

• Ethernet II frame type: Enable

• Polling NetWare Queues interval: 1 second

• Job Notiﬁcation by Login Name

• Set the Master ﬁle server as the speciﬁed server (in Binary-based ﬁle server environment)

• Set the context name to the current context name (in NDS environment)

• Set the NDS tree name to the current NDS tree name (in NDS environment)

• Set NetWare Operation Mode: Print Server Mode

• Set the device name as speciﬁed in the parameter list

• Set the device password to NULL