Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Using Advanced Management Tools 7-17
The print server supports multiple protocols but only one name is used for the print server, no
matter what protocol is used. As a result, whatever name chosen affects the operation of the print
server under different protocols. Therefore, NETGEAR recommends that the device name be
determined for the whole network and not changed.
NetWare Print Server Mode
The NetWare Print Server Mode selection sets the NetWare server (Bindery mode) or tree
(NetWare Directory Services mode) that the print server should service. It configures the printer to
operate in either PSERVER mode or RPRINTER mode.
T
able 7-10 lists the fields of the NetWare Print Server Mode, describes their functions, and
explains how to provide information in each field.
Table 7-10. NetWare Print Server Mode Fields
Field Description
Operation Mode Configures the printer server to operate in either PSERVER mode (PS) or
RPRINTER mode (RP).
Frame Ethernet_II Enable or disable the print server to decode Ethernet II packets.
Frame Ethernet_802.2 Enable or disable the print server to decode Ethernet 802.2 packets.
Frame Ethernet_802.3 Enable or disable the print server to decode Ethernet 802.3 packets.
Frame Ethernet_SNAP Enable or disable the print server to decode Ethernet SNAP packets.
Master File Server
(Binary Mode Only)
When operating in Bindery mode, the print server logs on to a file server and
services the queue set up on that particular server. Enter the name of the master
file server of the print server. This entry field is valid only when the print server is
operating in PSERVER mode.
Notification by
Connection ID
Set to YES to receive a job notification at only the workstation where the print job
originated. Set to NO to receive a job notification at all workstations that you have
logged on. This entry field is valid only when the print server is operating in
PSERVER mode.
Queue Polling Interval Defines how often the print server will poll the queues to be serviced. The control
unit is in seconds. This entry field is valid only when the print server is operating in
PSERVER mode.
NDS Tree Name
(NDS mode only)
This is the NDS tree that the NETGEAR print server logs on. The name must not
exceed 19 characters or contain any space. This entry field is valid only when the
printer server is operating in PSERVER mode.