Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Using Advanced Management Tools 7-15
Configuring Using PSCONFIG
This section of the manual describes the MS-DOS-based print server configuration program,
PSCONFIG. Prior to executing PSCONFIG, you must have the following software or drivers
installed in the system:
• NetWare Link Support Layer, LSL.COM
This program looks into the NET.CFG file for various network parameters such as packet type.
• DOS ODI driver for the network adapter card installed and the network adapter card connected
to the network
The network speed, duplex mode, and frame types settings for the network adapter card are all
controlled within the NET.CFG file.
• NetWare IPX/SPX protocol, IPXODI.COM
This program provides the IPX protocol support for the adapter card.
To start the PSCONFIG program, execute it from the \DOS directory of the Model PS104/PS105/
PS110/PS113 Print Server Resource CD.
When the PSCONFIG program is executed, you see a list of the print servers on the attached
network. The network number shown is the NetWare IPX network number that is valid only to
NetWare networks. From the main screen, move the cursor up and down to select the print server
you want to configure and then press [Enter]. A second popup window with the Available Options
headline appears in the lower-right corner of the screen. The options available are outlined in the
next section, “
PSCONFIG Fields.”
PSCONFIG Fields
Table 7-9 lists the PSCONFIG Program options available on the Available Options window.
Table 7-9. PSCONFIG Program Options
Field Description
Change
Configuration
Pops up another screen for more detailed configuration of the various protocol
parameters.
Device
Information
Select this option to pop up a scrolling window providing a status of the various
parameters on the print server that can be customized. This information includes the
various NetBEUI, NetWare, and TCP/IP parameters.