Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
7-8 Using Advanced Management Tools
Master file server
(Binary Mode Only)
When operating in Bindery mode, the print server logs on to a file server and
services the queue set up on that particular file server. Enter the name of the master
file server of the print server.
Polling Interval Defines how often the print server will poll the queues to be serviced. The control
unit is in seconds.
Job Notification by
Connection ID
Set to Yes to receive a job notification at only the workstation where the print job
originated. Set to No to receive a job notification at all workstations that you have
logged on.
Frame Type Select the frame types used by your network (Ethernet 802.2, Ethernet 802.3,
Ethernet SNAP, and Ethernet II).
Change Password Click on this button to open the password control window for the print server when
operating in NetWare PSERVER mode. The print server uses this password to log
on to the NetWare server or NDS tree. Click on this button to open the change
password window. Type in the same password twice and click the Save to Device
button to confirm the password entry. When a print server object is created in the file
server, the password for the print server is set to Null (no password protection). The
factory default password for the print server is also set to Null. When changing the
password, both passwords in the print server and the file server need to be modified
for the two servers to communicate properly. The print server password can be
changed through this popup window, but PCONSOLE or NWADMIN needs to be
executed to provide the proper password setting to the file server.
Table 7-3. NetWare PSERVER Menu Tab Fields (continued)
Field Description