Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
7-6 Using Advanced Management Tools
NetWare PServer Menu Tab
The NetWare PServer menu tab sets the NetWare server (Bindery mode) or tree (NetWare
Directory Services mode) that the print server should service. Figure
7-4 shows the menu and its
fields, and T
able 7-3 describes the functions and explains how to provide information in each field.
Table 7-2. System Menu Tab Fields
Field Description
Device Name Choose a descriptive name for the router for identification purposes (for example,
EngPrsv). This name is used in all protocols to identify the specific print server. There is
a factory default name. For any change, NETGEAR recommends that a name be
determined before setting the print server in any network. This name should be no more
than 16 characters. Spaces are not allowed, but dashes (-) and underscore marks (_) are
accepted.
IPX/SPX
Protocol
Choose to enable or disable the IPX/SPX protocol used in the NetWare environment.
This selection is always shadowed to indicate that the IPX/SPX protocol is always active
and cannot be disabled.
TCP/IP Protocol Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking
and Microsoft networking. The factory default is Enable.
NetBEUI
Protocol
Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a
small-scale Microsoft networking environment.