Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
6-8 UNIX Printing Using TCP/IP
7. Copy the CONFIG file back to the print server and then reset the device by using the
commands:
ftp NAME
ftp>put CONFIG
ftp>get RESET
8. Quit by using the command:
ftp>quit
List of FTP Files and Commands Supported by the Print Server
Table 6-1 lists the file names that appear in the directory.
T
able 6-2 lists the case-sensitive commands that are implemented. When a command requires a
parameter, the parameter is shown in italics.
Table 6-1. FTP Files in the Directory
File Name Purpose Mode
CONFIG Configuration file Read/Write
PSINF Device information Read
DEFAULTC Reset device to default configuration Read
RESET Reset device Read
PASSRESET Clear password Read
SETIP Save current IP address Read
Table 6-2. FTP Commands
Command Function
dir Lists files as shown in Table 6-1.
get FILENAME Retrieves a file. The only files that can be retrieved are CONFIG and PSINF.
get RESET Resets the print server and terminates the current connection.
get PASSRESET Clears the password.
get SETIP Sets the current IP address as a static IP address.
To avoid an address conflict, do not use this command if a DHCP server assigned the IP
address to the print server.