Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server

5-22 Novell NetWare Printing

3. Select the print server.

4. Select Change Conﬁguration.

5. Select NetWare Conﬁguration.

6. Verify that the Operation Mode ﬁeld shows RP for RPRINTER mode.

7. Enter the correct NetWare print server names in each one of the Novell PSERVER ﬁelds.

8. Return to the Select Conﬁguration Item window.

9. Select Execute Change.

Your print server is now conﬁgured in NetWare RPRINTER mode and ready to service multiple

NetWare print servers.

Using Logical Ports

Logical ports can be used to create a “virtual” printer. For example, to create a landscape printer,

you could deﬁne a logical printer as:

• Pre-string—printer control codes to switch the printer to landscape mode

• Post-string—printer control codes to reset the printer, restoring the default settings

Another example of the use of logical printers is to print UNIX-format text ﬁles properly, by

converting UNIX-style LF (Line Feeds) to DOS-style LF/CR (Line Feed, Carriage Return) pairs.

Each Model PS104 and Model PS105 Print Server has one parallel port and supports three logical

printers. Each Model PS110 and PS113 Print Server, with two and three parallel ports respectively,

supports eight logical printers.

Conﬁguring Logical Printers on the Print Server

To deﬁne pre-string, post-string, and the physical output port of a logical printer:

1. Execute the PSCONFIG program.

2. Select the Model PS104/PS105/PS110/PS113 print server, and then select Change

Conﬁguration.