Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server

5-18 Novell NetWare Printing

g. Press [Esc] to return to the Select Conﬁguration Item window.

h. Select System Conﬁguration if any changes to the print server name are necessary.

To change the print server name, Select Device Name, change the print server to the new

name, and then exit back to the Select Conﬁguration Item window.

i. Select Execute Change.

j. Press [Enter] when asked if you are sure.

k. Press [Esc] when a window opens indicating that the conﬁguration is complete.

l. Press [Esc] to return to the Active Device List main menu.

You can press F2 to make sure that the new print server name is activated, if it was

changed.

m. Press [Esc] to exit the PSCONFIG program.

4. Load the PSERVER.NLM on the NetWare ﬁle server.

If the NetWare print server to which the NETGEAR print server will be connected has been

previously loaded, you must unload and reload it again. If unloading and reloading the

PSERVER NetWare Loadable Module (NLM), start with step a. If you are loading the NLM

for the ﬁrst time, go to step d.

To load the NetWare PSERVER module:

a. Go to the ﬁle server console where the PSERVER.NLM is running.

b. Press [Alt] + [Esc] until the print server NLM window opens.

c. Press [Esc] to stop the print server NLM and answer Yes.

d. Enter the following command when the NetWare NLM has been unloaded:

load pserver .XXXX.YYYY

xxxx is the NetWare print server selected in step 3 f.

YYYY is the NDS context information recorded when you logged in to the ﬁle server as

ADMIN.

e. Select Printer Status when the Available Options main menu opens to monitor the

print server status.