Quick Start Manual

Model PS104/PS105/PS110 Print Server Installation Guide
You can place the print server on a desktop or any flat surface. To save work
space, you can also mount the print server with Velcro strips on the side of a
printer.
Connect a cable (not provided) from the printer to the parallel PRINTER port on
the print server. If you are connecting one printer to the Model PS110 Print
Server, you can use either of the ports.
Using the 10BASE-T Network Ports
Use the following table for setting the push button switch and for selecting
either a crossover or straight-through cable when connecting the print server to
other devices.
Connecting Network Port Connecting Device Cable Used
Model PS104 Print Server
Port 1 set to Uplink Hub or switch Straight-through cable
Port 1 set to Normal PC or router Straight-through cable
Ports 2 through 4 PC or router Straight-through cable
Model PS105 Print Server
Port 2 set to Uplink Hub or switch Straight-through cable
Port 2 set to Normal PC or router Straight-through cable
Ports 3 through 5 PC or router Straight-through cable
Model PS110 Print Server
Hub or switch Straight-through cable
PC Crossover cable
Note: Ethernet specifications limit the twisted pair cable (called a
twisted pair segment) extended from a network port to 100 meters in
length.
Install the Print Server
Connect the Printer Cables
Connect the Network Cables