Quick Start Manual

Model PS104/PS105/PS110 Print Server Installation Guide
Verify that your package contains the following:
• Model PS104, Model PS105, or Model PS110 print server
• Power adapter
• BNC terminator and T-Connector (Model PS105 only)
• PS100 Series Print Server Resource CD
• This installation guide
• Warranty & Owner Registration Card
• Support Information Card
Customer Support
Call your reseller or NETGEAR Customer Support in your area if there are any
wrong, missing, or damaged parts.
Keep the carton, including the original packing materials. Use them to repack
the print server if you need to return it for repair.
Note: If the supplied power adapter does not meet your country
requirements, make sure you use the appropriate power adapter as
required by your national electrical codes and ordinances.
Package Contents
PWR
Link/Act Alert
PRINTER
10/100 Mbps Print Server
12
On=Link; Blinking=Rx
34
Col
NETWORK
PS104
MODEL
9002FB
PS100 Series Print Server
(Model PS105 Print Server shown)
PS100 Series
Print Server Resource
CD,
Installation Guide,
Warranty & Owner
Registration Card,
Support Information Card
Power
Adapter