Quick Reference Guide

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Using Advanced Management Tools 7-21
Configuring Using QUICKSET
This section describes how to use the QUICKSET program to configure the Novell server and the
print server. Use QUICKSET /? to display the help screen. You must have the following software
and drivers loaded prior to executing the QUICKSET program:
• NetWare Link Support Layer, LSL.COM
This program looks into the NET.CFG file for parameters.
• Network adapter card driver for the adapter card installed and connected to the network
The network speed, duplex mode, and frame types are all controlled within the NET.CFG file.
• NetWare IPX/SPX protocol, IPXODI.COM
This program provides the IPX support for the adapter card.
• NetWare shell, NETX.EXE, or NetWare virtual loadable module; VLM.EXE and its
associated modules
NetWare Print Server (PSERVER) Mode
In the NetWare Print Server mode, QUICKSET uses these settings:
• Ethernet 802.2 frame type: Enable
• Ethernet 802.3 frame type: Enable
• Ethernet SNAP frame type: Enable
• Ethernet II frame type: Enable
• Polling NetWare Queues interval: 1 second
• Job Notification by Login Name
• Set the Master file server as the specified server (in Binary-based file server environment)
• Set the context name to the current context name (in NDS environment)
• Set the NDS tree name to the current NDS tree name (in NDS environment)
• Set NetWare Operation Mode: Print Server Mode
• Set the device name as specified in the parameter list
• Set the device password to NULL