User's Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
3-26 Performing Network and System Management
v1.0, September 2009
import. However, NETGEAR recommends that you replace this digital certificate with a digital
certificate from a well-known commercial CA prior to deploying the STM in your network.
The STM’s Certificate Management screen lets you to view the currently loaded digital certificate
for HTTPS scans, upload a new digital certificate, manage the trusted CA authorities list, and
manage the untrusted certificates list.
To display the Certificate Management screen, select Web Security> Certificate Management
from the menu. Because of the size of this screen, and because of the way the information is
presented, the Certificate Management screen is divided and presented in this manual in three
figures (Figure 3-15 on page 3-26, Figure 3-16 on page 3-28, and Figure 3-17 on page 3-29).
Managing the Certificate for HTTPS Scans
To manage the STM’s active certificate that is used for HTTPS scans:
Select Web Security> Certificate Management from the menu. The Certificate Management
screen displays. Figure 3-15 shows only the Certificate Used for HTTPS Scans section of the
screen.
Figure 3-15