User's Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
6-2 Monitoring System Access and Performance
v1.0, September 2009
Configuring the E-mail Notification Server
If you have used the Setup Wizard, you might have already configured the e-mail notification
server; the E-mail Notification Server screen allows you to modify these settings.
The STM can automatically send information such as notifications and reports to an administrator.
You must configure the necessary information for sending e mail, such as the administrator’s
e-mail address, the e-mail server, user name, and password.
To configure the e-mail notification server:
1. Select Global Settings > Email Notification Server from the menu. The Email Notification
Server screen displays (Figure 6-1 contains some examples).
2. Complete the fields, select the radio button and checkboxes, and make your selections from
the pull-down menus as explained in Table 6-1.
Figure 6-1
Table 6-1. E-mail Notification Settings
Setting Description (or Subfield and Description)
Show as Mail sender A descriptive name of the sender for e-mail identification purposes. For
example, enter [e-mail].
Send Notifications to The e-mail address to which the notifications should be sent. Typically, this is
the e-mail address of a user with administrative privileges.