User's Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
5-26 Managing Users, Groups, and Authentication
v1.0, September 2009
To view all or selected users:
1. On the Active Users screen (see Figure 5-18 on page 5-25), select one of the following radio
buttons:
• View All. This selection returns all active users after you have clicked the Search button.
• Search Criteria. This selection lets you enter the following search criteria so that only
selected users are returned after you have clicked the Search button.
Either use the IP address or User field, but not both:
– IP Address. Enter an IP address or an IP address and subnet mask in CIDR notation
(for example, /024).
– User. Enter a domain and user name in the domain:name format (for example,
proescuredomain:JohnP).
2. In the Display field, enter a number to specify how many entries per page the search result
screen returns.
3. Click Search. The search result screen displays (Figure 5-19 contains an example).
The List of Users table displays the following fields:
• IP Address. The IP address that is associated with the user.
• User. The domain that is associated with the user and the user name.
• Group. The group to which the user belongs, if any.
• Last Seen. The most recent time that scanned traffic associated with the user (that is, IP
address) passed through the STM.
To log out selected active users:
1. Om the search result screen select the checkboxes to the left of the users that you want to log
out.
2. Click Logout.
Figure 5-19