User's Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Content Filtering and Optimizing Scans 4-49
v1.0, September 2009
2. Under the Exceptions table, click the add table button to specify an exception rule. The Add
Exception screen displays.
3. Complete the fields and make your selections from the pull-down menus as explained in
Table 4-17.
Figure 4-25
Table 4-17. Add Exception Settings
Setting Description
Action From the pull-down menu, select the action that the STM applies:
• allow. The exception allows access to an application, Web category, or URL that is
otherwise blocked.
• block. The exception blocks access to an application, Web category, or URL that is
otherwise allowed.
Applies to Click the edit button to open the “Applies to” screen that lets you configure a domain,
group, or individual user to which the exception must apply (see the screen below, in the
table).
If applicable, on the “Applies to” screen, click a lookup button to retrieve a domain,
group, or user. When you have made your decision, click an Apply button to add the
domain, group, or user to the Applies to field on the Add Exception screen.
The options on the “Applies to” screen are explained below.