Owner's Manual

030-300233 Rev. A 91 May 2006
Westell (Models 6000, 6100, 6110)
User Guide
Service Name The NAT service for which you are configuring Port Forwarding.
Type The type of NAT service configuration you selected.
Protocol The type of Protocol that is used to run this NAT service.
Possible Responses:
TCP- Transmission Control Protocol.
UDP-User Datagram Protocol (UDP).
Global ports The WAN-side TCP/UDP port range.
Base Host Port The port on the WAN that will host the NAT service selected.
13.3 Port Forwarding Trigger Ports
To select Port Forwarding Trigger Ports, click on define custom service from the Service Configuration screen,
and then select Trigger Ports from the Custom Service screen. Click next. The follow settings will be displayed in
the Trigger Ports screen. Enter your values in the Local ‘Trigger’ Port Range fields and click next to continue.
Service Name The NAT service you selected.
Local Trigger Port Range The local LAN side TCP/UDP port.
Global Port Range The WAN side TCP/UDP port range.