Owner's Manual

030-300233 Rev. A 108 May 2006
Westell (Models 6000, 6100, 6110)
User Guide
Could not test: The test could not be executed due to Router settings. Check your
DSL sync or your PPP session. You must have both a DSL sync and a PPP
connection established to execute a PING.
Trace Route Determines the route taken to destination by sending Internet Control Message
Protocol (ICMP) echo packets with varying IP Time-To-Live (TTL) values to the
destination. Trace Route is used to determine where the packet is stopped on the
network.
15.2 Diagnostic Logs
The following screen will be displayed if you select Troubleshooting > Diagnostic Logs from the main menu.