User's Manual
Table Of Contents
- Contents
- 1. Your PowerLINE Adapter
- 2. PowerLINE Networks
- How the PowerLINE Adapter Fits Into Your Network
- Set Up a New PowerLINE Network
- Connect to the PowerLINE Access Point
- Use WPS to Connect to Your Network (PLW Models)
- Customize Your Network Settings (PLW Models)
- Add an Adapter to an Existing PowerLINE Network
- About PowerLINE Network Security
- Use the Button to Set the Encryption Key
- 3. Troubleshooting
- A. Technical Specifications and Safety Information
- PowerLINE PL1000 and PL1010 Technical Specifications
- PowerLINE PL1000v2 and PL1010v2 Technical Specifications
- PowerLINE PLP1000 Technical Specifications
- PowerLINE PLW1000 and PLW1010 Technical Specifications
- PowerLINE PLW1000v2 and PLW1010v2 Technical Specifications
- PowerLINE PL1200 Technical Specifications
- PowerLINE PLP1200 Technical Specifications
- Safety Information
PLW1000 and PLW1010
The hardware features of the PowerLINE PLW1000 and PLW1010 adapters are shown
in the following figure. Note that adapters vary by region. Your adapter might look
different.
Figure 4. Hardware features
Power LED1
Ethernet LED2
Pick A Plug LED3
Ethernet port4
Factory Reset button5
Security button6
Wireless LED7
On/Off switch8
WPS button9
User Manual9Your PowerLINE Adapter
PowerLINE