User's Manual
Table Of Contents
- Contents
- 1. Your PowerLINE Adapter
- 2. PowerLINE Networks
- How the PowerLINE Adapter Fits Into Your Network
- Set Up a New PowerLINE Network
- Connect to the PowerLINE Access Point
- Use WPS to Connect to Your Network (PLW Models)
- Customize Your Network Settings (PLW Models)
- Add an Adapter to an Existing PowerLINE Network
- About PowerLINE Network Security
- Use the Button to Set the Encryption Key
- 3. Troubleshooting
- A. Technical Specifications and Safety Information
- PowerLINE PL1000 and PL1010 Technical Specifications
- PowerLINE PL1000v2 and PL1010v2 Technical Specifications
- PowerLINE PLP1000 Technical Specifications
- PowerLINE PLW1000 and PLW1010 Technical Specifications
- PowerLINE PLW1000v2 and PLW1010v2 Technical Specifications
- PowerLINE PL1200 Technical Specifications
- PowerLINE PLP1200 Technical Specifications
- Safety Information
PowerLINE PLP1000 Technical Specifications
The PLP1000 adapter meets the technical specifications defined in the following table.
Table 5. Technical specifications
SpecificationFeature
IEEE 802.3 (10BASE-T), IEEE 802.3u
(100BASE-T), IEEE 802.3ab
(1000BASE-T)
Data and routing protocols
100–240V, 0.2A (max.)AC input
EU: 16A, 250V; NA: 11.8A, 125V; UK:
13A, 250V
Socket-outlet rating (max. load)
Normal: < 4W; Power saving mode:
< 0.5W
Power consumption
120 x 58 x 42 mm (4.72 x 2.28 x 1.65
in.)
Dimensions
Varies by region. About 183 g (0.40
lb)
Weight
0° to 40°C (32º to 104ºF)Operating temperature
10–90% maximum relative humidity,
noncondensing
Operating humidity
5–95% maximum relative humidity,
noncondensing
Storage humidity
128-bit AESSecurity encryption type
8 (active), 16 (total): number of nodes
that can be added to a single network
MAC addresses
1000 MbpsBandwidth
Up to 1000 Mbps with real
throughput greater than 80 Mbps
Data transfer rate
2–68 MbpsFrequency band
4096/1024/256/64/16/8-QAMModulation type
User Manual31Technical Specifications and
Safety Information
PowerLINE