User's Manual
Table Of Contents
- Contents
- 1. Your PowerLINE Adapter
- 2. PowerLINE Networks
- How the PowerLINE Adapter Fits Into Your Network
- Set Up a New PowerLINE Network
- Connect to the PowerLINE Access Point
- Use WPS to Connect to Your Network (PLW Models)
- Customize Your Network Settings (PLW Models)
- Add an Adapter to an Existing PowerLINE Network
- About PowerLINE Network Security
- Use the Button to Set the Encryption Key
- 3. Troubleshooting
- A. Technical Specifications and Safety Information
- PowerLINE PL1000 and PL1010 Technical Specifications
- PowerLINE PL1000v2 and PL1010v2 Technical Specifications
- PowerLINE PLP1000 Technical Specifications
- PowerLINE PLW1000 and PLW1010 Technical Specifications
- PowerLINE PLW1000v2 and PLW1010v2 Technical Specifications
- PowerLINE PL1200 Technical Specifications
- PowerLINE PLP1200 Technical Specifications
- Safety Information
Interference from these appliances might prevent PowerLINE products from working
correctly or reduce PowerLINE network performance.
•
Do not plug PowerLINE products into a power strip, extension cord, or surge
protector. Connecting a PowerLINE product to one of these devices might prevent
the product from working correctly or reduce PowerLINE network performance.
Set Up a New PowerLINE Network
You can use two or more PowerLINE adapters to form a network or extend an existing
network to additional wired Ethernet devices.
PowerLINE networks use an encryption key common to all adapters on the network.
You can use the default key or a private key. We recommend that you use a private key.
This procedure sets a private key.
To set up a new PowerLINE network:
1.
If you are extending an existing wired network, make sure that your wired Ethernet
connections are working by navigating to a web page from a computer connected
to your router or gateway using an Ethernet cable.
2. Plug one PowerLINE device into a wall outlet near your router or gateway.
User Manual18PowerLINE Networks
PowerLINE