Product Datasheet

This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller.
*
90-day complimentary technical support following purchase from a NETGEAR authorized reseller.
1
For a complete list of HomePlug AV certified devices, please check www.homeplug.org/certified_products.
†
Actual data throughput and data over distance will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction,
and network overhead, result in lower actual data throughput rate.
Outlets must be electrically connected in order for Powerline devices to provide a network connection between them.
NETGEAR, and the NETGEAR Logo, are trademarks of NETGEAR, Inc. Mac and the Mac logo are trademarks of Apple Inc. Any other trademarks herein are for reference purposes only.
© 2016 NETGEAR, Inc. All rights reserved.
NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, www.NETGEAR.com/support D-PL1010v2-0
PAGE 2 OF 2
P C
• Two (2) Powerline 1000 Adapters (PL1010v2)
• Two (2) 2 m (6.5 ft) Ethernet cables
• Quick start guide
W
• www.netgear.com/about/warranty
S R
• RJ-45 Ethernet port
• Existing electrical wiring and outlets
S
• Dimensions: 100 x 59 x 35.9mm (3.9 x 2.3 x 1.4 in)
• Weight: 126 g (0.28 lb)
• 1000 Mbps
†
Powerline interface
• 10/100/1000 Mbps
†
Gigabit Ethernet port
• Typical coverage up to 500m
2
(5,832ft
2
)
†
• Works with HomePlug AV
1
and HomePlug Green
PHY devices
• IEEE
®
802.3 compliant
• Power consumption: 3.73W (0.49W in standby
mode)
Connection Diagram
Connects to
Ethernet port
Connexion à
un port Ethernet
Push-and-Secure button
Bouton « Push-and-Secure »
Pick-a-Plug LED
Diode « Pick-a-Plug »
Powerline 1000
Essentials Edition Data Sheet
PL1010