Quick Start Manual

Model PA310 Network Card Installation Guide
If you do not have a modem or Ethernet card installed, proceed to section 7,
“Access the Network Printer.”
1.
Answer Yes for the one PC connected to a modem or router that can be
used for Internet access. For all other PCs in your home, answer No.
The default setting is No.
If you select No and click on Next, you will be asked to reboot the system. If
this is the case, you are finished with the FirstGear Internet-sharing
installation. Complete sections 1 through 6 for all other PCs in your home,
and then proceed to section 7 to enable the other PCs in your home to access
the shared printers.
If you select yes and click on Next, the FirstGear - Share The Internet
window opens.
2.
Click on Next to open the FirstGear - Ethernet Card Detected window.
Note: Only one PC in your home can be designated to share the
Internet service with all other PCs in your home.
Note: You will need to have the PC that has a router or an analog,
cable, or ADSL modem attached to it powered on in order for the
other PCs to use the Internet.
Note: If you do not have an Ethernet card installed in your PC, the
FirstGear - Ethernet Card Detected window does not appear. Proceed
to step 5, in this section.
Access the Internet