Quick Start Manual

Model PA310 Network Card Installation Guide
After the system restarts, be sure that the NETGEAR Phoneline10X Resource
CD is inserted in your CD drive.
1. From the Start menu, select Run and at the prompt, type the following:
G:\setup.exe (“G:” represents the CD drive letter), and click on OK to
open the Welcome window.
FirstGear software automatically detects if all the necessary Windows
network services are installed. If any of the services are missing, FirstGear
installs them automatically. After the services have been installed, the
following FirstGear Network Services Installed window opens:
Click on OK to restart your PC.
When the PC restarts, the Welcome page opens.
Note: If you have an Ethernet adapter installed in the same PC, you
can use your Ethernet adapter to share your Internet connection. The
Ethernet adapter must be connected to a cable modem, ADSL
modem, or router. However, if your Ethernet adapter is connected to
an Ethernet network instead of a modem or router, you will not be
able to share files and printers between the Phoneline network and
the Ethernet network.
Install the PA301 Software