Download

The first time that you set up the Internet connection for your router, the browser goes to
orbilogin.com, and the Orbi login page displays.
If you already set up the Internet connection, enter orbilogin.com in the address field for your
browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the web page, do the following:
Make sure that the computer is connected to one of the four LAN Ethernet ports or over WiFi to the
router.
Make sure that the router is receiving power, and that its Power LED is lit.
Close and reopen the browser or clear the browser cache.
Browse to orbilogin.com.
If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain
an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings.
b. Make sure that you selected the correct options and typed everything correctly.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read Troubleshooting on page 122.
If problems persist, register your NETGEAR product and contact NETGEAR technical support.
Log In to Orbi Web Interface
When you log in to the Orbi, the browser displays the router web interface.You can use the router web
interface to change the router or satellite settings.
To log in to your Orbi:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
Connect to the Network and Access the Router
33
Orbi WiFi System